A product will only become a "good product" if it is used successfully in the intended application environment.

When a complex customer project has gone through all phases from start to completion and the customer-specific monitor solution has been manufactured, its true purpose comes into play: Its application!

Only here, in the real operation under realistic environmental conditions, the design, conception, components and the entire system must prove itself. Only if this is successful, our customer will finally speak of success!

Our customer-specific display solutions have been successful for decades in the most diverse applications and markets.

This Canvys platform forms the basis for the following applications

Colposcopy Digital Imaging System

Colposcopy Digital Imaging System

A colposcope digital imaging system is used to perform a colposcopy, a medical diagnostic procedure to examine the cervix. With new technological advancement, the medical device now uses algorithms and different shades of color to highlight areas of interest to a clinician. The color rendition of the touch screen monitor needs to remain consistent through the life cycle of the product, as different shades indicate highlighted areas that may need further investigation. The system requires a full HD (1920 x 1080) display in a small, slim, and light form factor, with a high level of brightness, factoring in the treatment room's high ambient light. A 15.6” 500 cd/m² panel meets these parameters.

The unit is sealed correctly for the environment (IP54 to the front and IPX2 to the rear) to ensure it can be cleaned and disinfected with liquids and astringents, including 99 % isopropyl alcohol and Ethanol, to prevent the ingress of liquid which might damage the internal electronics. Canvys designed and tooled a unique plastic chassis with a sealed front bezel and no external rear vents to prevent ingress. In standard plastic case units, vents aid cooling, so our design team uses heat management electronics to meet these challenges.

The touch sensor can operate without gloves or with two layers of gloves. The touch sensor is thick to make it more robust. The addition of specialized coatings enhance the contrast of the image and limit external light reflection. Canvys’ engineering team designed-in long-life components to ensure a long product life cycle, and reduce the need for costly redesign and recertification.

Due to the strict regulatory controls in this environment, it was necessary to meet the EMI & EMC standard as required by the fourth edition IEC 60601-1-2 and meet other EU standards. As an ISO13485 approved medical device manufacturer, Canvys is certified to manufacture monitors to meet these and UL standards.

Note: All application notes are meant as examples only and is for general informational purposes only. How customers use our customized solutions as components within their systems varies significantly by customer. Regulatory compliance is the sole responsibility of the customer. Neither Canvys nor Richardson Electronics, Ltd. or any of its subsidiaries have any responsibility or liability for such compliance.

Posted on: 03. September 2020  |  by: Andrew Perez  |  Districts Sales Manager  |  Canvys – Visual Technology Solutions

Item Code: MML#US-004


 

Recommended Products/Platforms for this Application

V SERIES MEDICAL MONITORS
15.6"

Medical display with slim design available with fully closed housing or with ventilation holes.
Available in 16:9 and 16:10 formats.

  • Bright Full HD Panel for brilliant images
  • Modern True Flat Display for easy cleaning and disinfection
  • DICOM® compatible
  • Wide viewing angle
  • Anti-Reflective or Anti-Glare Glass
  • PCAP Multitouch Sensor with 10 point technology, operable by finger or latex gloves

G SERIES MEDICAL MONITORS
21.5"

Medical displays with slim design, closed housing, OSD touch keys on glass, and optional ventilation holes.
Available in 16:9 format.

  • Full HD Panel with IPS technology
  • DICOM® compatible
  • Auto Luminance System and Calibration Mode
  • Wide viewing angle
  • PCAP Multitouch Sensor with 10 point technology, operable by finger or latex gloves
  • All-In-One version in same housing design
Graphics: LCD Full Customizing

FULL CUSTOMIZED SOLUTIONS

Canvys is an OEM/ODM manufacturer. In order to offer you customized display solutions at a competitive price, we have developed various platforms.

These serve as a basis for a variety of individual solutions, which we can realize for you.
However, for certain customer/application cases, these platforms are not suitable. You need unique display systems, which Canvys develops and produces as a full-customizing solution.

We will be happy to recommend you which solution is the best for your application.

Cardiovascular Imaging and Visualization

(#Not approved) Cardiovascular Imaging and Visualization

The customer here is the global leader in cardiovascular care, providing low invasive devices for the treatment of coronary artery disease. Their philosophy is to deliver high quality devices with unique and innovative technology. They offer a comprehensive device portfolio including products for the diagnosis and treatment of coronary artery disease.

The Main Application:

Medical cart system which provides intravascular imaging and visualization. The system is mainly used in coronary intervention to verify both stent position and blood vessels’ condition.

Challenge and Description of the Project:
Customer’s arterial imaging system was moving to NextGen as well as resolving an End Of Life (EOL) issue with the legacy monitor. The legacy monitor used CCFL technology (essentially obsolete) that did provide the customer / application with a crisp black and white image, a critical parameter for the application.

The customer had requirements to maintain same color ‘temperature’ and brightness for ease of retrofit and to minimize retraining impact for the medical personnel using the system. Use of system power (not Canvys power supply) required re-certification for UL and re-testing to 60601 EMI standards. Transition to the new monitor solution was to be as transparent to the operator / installation as possible.

The Canvys engineering team, along with program management, sales and manufacturing team engaged with the customer to develop a solution that would meet system requirements. To minimize engineering time and expense, an existing monitor was chosen for a production baseline. A specification for optical performance to match the legacy product was developed, including parameters for brightness uniformity, chromaticity / color temperature, max brightness, and intensity / luminance. To ensure conformance to this specification (less than 10 % variation on each parameter), a calibration and validation test has been implemented for 100 % of production units. In addition, per customer request, Canvys created custom firmware for the monitor to disable typical ‘auto-off’ / power safe functionality as this would be disruptive to the system implementation.

To allow for the customer to use their existing power supply, Canvys recertified the product with UL and worked with the customer throughout their system level IEC 60601 and ESD test processes.

Note: All application notes are meant as examples only and is for general informational purposes only. How customers use our customized solutions as components within their systems varies significantly by customer. Regulatory compliance is the sole responsibility of the customer. Neither Canvys nor Richardson Electronics, Ltd. or any of its subsidiaries have any responsibility or liability for such compliance.

Posted on: 04. August 2020  |  by: Karen Wheet  |  Districts Sales Manager  |  Canvys – Visual Technology Solutions

Item Code: MML#US-020


 

Recommended Products/Platforms for this Application

V SERIES MEDICAL MONITORS
15.6"

OEM/ODM Platform with a slim housing, optionally with completely closed housing or with ventilation holes

  • Bright Full HD Panel for brilliant images
  • Modern True Flat Display for easy cleaning and disinfection
  • DICOM® compatible
  • Wide viewing angle
  • Anti-Reflective or Anti-Glare Glass
  • PCAP Multitouch Sensor with 10 point technology, operable by finger or latex gloves

D SERIES MEDICAL MONITORS
21.5"

OEM/ODM Platform with a modern designed flat screen housing and OSD Wheel on the monitor side provides brilliant high definition images

  • Full HD Panel with high Contrast Ratio
  • Plastic housing and OSD Wheel
  • DICOM® compatible
  • PCAP Multitouch Sensor with 10 point technology, operable by finger or latex gloves
  • Wide viewing angle
  • Anti Reflective or Anti Glare Glass

G SERIES MEDICAL MONITORS
21.5"

OEM/ODM Platform with a slim and completely closed housing without ventilation holes and OSD touch keys on front glass provides brilliant high definition images

  • Full HD Panel with IPS technology
  • DICOM® compatible
  • Auto Luminance System and Calibration Mode
  • Wide viewing angle
  • PCAP Multitouch Sensor with 10 point technology, operable by finger or latex gloves
  • All-In-One version in same housing design

Dental Care Units

Dental Care Units

In a dental practice, the treatment room, dentist, dental assistant, patient, equipment, and the treatment plan form a complex network of relationships. Dental care units provide patients and doctors with the best possible treatment experience.

Canvys carefully considers quality, ease of use, safety, patient comfort, ergonomic flexibility, and cost efficiency in the development of dental care units. The process usually takes several years of design and engineering. For the manufacturers, this means years of research, significant investments, registration of patents, and carrying out the necessary certifications before launching the dental unit into the marketplace.

Canvys develops customer-specific monitor solutions with high-resolution image quality, superior contrast values and brilliant color reproduction, and certifications for such treatment units. Integrated protective glasses with different anti-reflection options to reduce reflections on the glass surface allow cleaning of the display with disinfectants. The user-friendly, touch screen interface enables efficient workflows, such as X-ray images, intraoral images, and schedules.

Canvys display solutions for the Dental industry easily combine other imaging devices such as a camera or microscope via its signal inputs. We also integrate customer-specific requirements such as a boot logo, back-printed customer logo on the protective glass or touch screen, and material requirements for the plastic housing into the overall design.

Note: All application notes are meant as examples only and is for general informational purposes only. How customers use our customized solutions as components within their systems varies significantly by customer. Regulatory compliance is the sole responsibility of the customer. Neither Canvys nor Richardson Electronics, Ltd. or any of its subsidiaries have any responsibility or liability for such compliance.

Posted on: 12. August 2020  |  by: Michael Schmid  |  Districts Sales Manager  |  Canvys – Visual Technology Solutions

Item Code: MML#DE-007


 

Recommended Products/Platforms for this Application

V SERIES MEDICAL MONITORS
15.6"

Medical display with slim design available with fully closed housing or with ventilation holes.
Available in 16:9 and 16:10 formats.

  • Bright Full HD Panel for brilliant images
  • Modern True Flat Display for easy cleaning and disinfection
  • DICOM® compatible
  • Wide viewing angle
  • Anti-Reflective or Anti-Glare Glass
  • PCAP Multitouch Sensor with 10 point technology, operable by finger or latex gloves

G SERIES MEDICAL MONITORS
21.5"

Medical displays with slim design, closed housing, OSD touch keys on glass, and optional ventilation holes.
Available in 16:9 format.

  • Full HD Panel with IPS technology
  • DICOM® compatible
  • Auto Luminance System and Calibration Mode
  • Wide viewing angle
  • PCAP Multitouch Sensor with 10 point technology, operable by finger or latex gloves
  • All-In-One version in same housing design
Graphics: LCD Full Customizing

FULL CUSTOMIZED SOLUTIONS

Canvys is an OEM/ODM manufacturer. In order to offer you customized display solutions at a competitive price, we have developed various platforms.

These serve as a basis for a variety of individual solutions, which we can realize for you.
However, for certain customer/application cases, these platforms are not suitable. You need unique display systems, which Canvys develops and produces as a full-customizing solution.

We will be happy to recommend you which solution is the best for your application.

Ophthalmologie (Augenheilkunde)

Refraktive Augen-Laser für Ophthalmologie

In der modernen Hornhautchirurgie geht es um eine sehr präzise Steuerung eines Femtosekundenlaser, um mit einem minimalen Eingriff, eine möglichst optimale Hornhautkorrektur zu erzielen. Ein innovatives Femtosekundenlasersytem vereint perfekt aufeinander abgestimmte Komponenten und bietet ein Höchstmaß an Schnittpräzision, Effizienz und späterem Komfort für den zu behandelnden Patienten. Nur so kann ein geringes Risiko von Infektionen, Epitheleinwachsungen und Flapkomplikationen sichergestellt werden.

Bis alle Hürden in Bezug auf Design, Systemspezifikationen und auch weltweite Zulassungen genommen sind, dauert die Entwicklung eines solchen Systems bis zu 5 Jahre.

Bei einem Femtosekundenlasersytem werden in der Regel zwei Displays mit verschiedenen Anforderungen benötigt.
Das Behandlungsdisplay sollte über eine möglichst hohe Auflösung und einen großen Blickwinkel verfügen, das Ganze bei hoher Helligkeit und Kontrastwerten. Dies ermöglicht ein hochqualitatives Videobild, welches dem Operateur während des automatisierten Eingriffes zur Kontrolle steht. Zur Steuerung der Einheit wird ein Multitouch basierend auf der PCAP-Touch-Technologie eingesetzt, welcher die Bedienung mit OP-Handschuhen ermöglicht und zusätzlich noch weitere Funktionalität durch die Gestensteuerung mit einbringt.

Beim Planungs- oder Beobachtungsdisplay werden größere Displaydiagonalen eingesetzt. Auch hier ermöglicht die anwenderfreundliche Benutzeroberfläche durch den Touchscreen effiziente Arbeitsabläufe. So können z.B. Patientendaten, Dokumentationen, Planungsansichten vom Arzt sowie die Bedienung der Medizingeräte einfach abgerufen und gesteuert werden.

Integrierte Schutzgläser mit unterschiedlichen Entspiegelungsmöglichkeiten zur Reduzierung von Reflexionen an der Glasoberfläche ermöglichen ein einwandfreies Reinigen des Displays mit Desinfektionsmitteln.
Das ergonomische Design der Displays mit integrierter Kabelabdeckung lässt sich problemlos über die VESA-Schnittstelle an bestehende Tragarme im OP einbinden.
Kundenspezifische Anforderungen wie z.B. ein Bootlogo, hinterdrucktes Kundenlogo auf dem Schutzglas oder Touchscreen sowie spezielle Anforderungen an das Material des Kunststoffgehäuses können ebenfalls umgesetzt werden.

Geposted am: 23. Juli 2020  |  von: Bernhard Zimmermann  |  Director of Sales  |  Canvys – Visual Technology Solutions

Artikelkennzeichen: MML#DE-010


 

Empfohlene Produkte/Plattformen für diese Anwendung

V SERIES MEDICAL MONITORS
15.6"

Medizinisches Display mit einem schlanken Gehäuse, wahlweise mit vollständig geschlossenem Gehäuse oder mit Lüftungsöffnungen.
Verfügbar im 16:9 und 16:10 Format.

  • Helles Full HD-Panel für brillante Bilder
  • Modernes True Flat Display für einfache Reinigung
  • DICOM® kompatibel
  • Weiter Betrachtungswinkel
  • Entspiegeltes oder mattes Glas
  • PCAP Multi-Touch-Sensor mit 10-Punkt-Technologie, bedienbar mit Fingern oder Latexhandschuhen

G SERIES MEDICAL MONITORS
21.5"

Medizinische Displays mit einem schlanken und vollständig geschlossenen Gehäuse ohne Lüftungsöffnungen und OSD-Touch-Tasten auf Frontglas.
Verfügbar im 16:9 Format.

  • Full-HD-Panel mit IPS-Technologie
  • DICOM® kompatibel
  • Auto Luminance System und Kalibrierungsmodus
  • Weiter Blickwinkel
  • PCAP Multi-Touch-Sensor mit 10-Punkt-Technologie, bedienbar mit Fingern oder Latexhandschuhen
  • All-in-One-Version im gleichen Gehäuse

G SERIES MEDICAL MONITORS
23.8"

Medizinische Displays mit einem schlanken und vollständig geschlossenen Gehäuse ohne Lüftungsöffnungen und OSD-Touch-Tasten auf Frontglas.
Verfügbar im 16:9 Format.

  • Full-HD-Panel mit IPS-Technologie
  • DICOM® kompatibel
  • Auto Luminance System und Kalibrierungsmodus
  • Weiter Blickwinkel
  • PCAP Multi-Touch-Sensor mit 10-Punkt-Technologie, bedienbar mit Fingern oder Latexhandschuhen
  • All-in-One-Version im gleichen Gehäuse